CELL
**New model in development, awaiting patent approval**
Custom designed Lithium Batteries
LiFePO4 structure will not rupture, explode or burn
6ga or 8ga Super Flex High Current wire
200 or 300amp connector and built in balance port
Wide range of voltage and amperage options
Many shapes to fit in a variety of locations
Outstanding shelf life, no memory effect,
Over 2,000 full charge to depleted cycles
CAD designed, with the option of a name and logo.
26.4v 2p1p Kicker
Dual 13.2v volt battery set up designed for GNCC quad racing. 13.2v Main 140/220amp peak 5ah with 13.2v "Kicker" 70/110amp peak 2.5ah pack.
3lbs - 92(h)x110(L)x86(w)
26.4v 1p1p Kicker
Dual 13.2v volt 70/110amp peak 2.5ah battery designed for GNCC racing.
1lb 14oz - 92(h)x110(L)x62(w)
13.2v 1p Inline 70/110a
13.2v volt 110amp peak 2.5ah battery. Will crank 650cc single and 1300cc 4 cylinder. Capacity is limited. Use only when minimal size and weight is required.
1lb - 90(h)x110(L)x32(w)
13.2v 1p Cube 70/110a
13.2v volt 110amp peak 2.5ah battery. Will crank 650cc single and 1300cc 4 cylinder. Capacity is limited. Use only when minimal size and weight is required.
Excellent battery option for Honda Groms, Kawasaki Z125's and Scooters
15oz - 90(h)x60(L)x60(w)
16.5v 1p Inline 70/110a
16.5v volt 110amp peak 2.5ah battery. Custom design intended for Motocross bikes with no charging system.
1lb 3oz - 88(h)x135(L)x34(w)
16.5v 1p Stack 70/110a
16.5v volt 110amp peak 2.5ah battery. Custom design intended for Motocross bikes with no charging system.
1lb 3oz - 88(h)x85(L)x56(w)
13.2v 3p 240/330amp
13.2v 330amp peak 7.5ah Large Displacement Motorcycles
Suitable for up to stock small block V8's. Use only when minimum space and weight is required.
3lb - 88(h)x110(L)x86(w)
13.2v 5p 350/550amp
13.2v 550amp peak 10ah
Suitable for mod small block V8's. Use only when minimum space and weight is required.
4lb 12oz - 90(h)x136(L)x112(w)
13.2v 2p 140/220amp
13.2v 14/220amp peak 5ah
1000cc motorcycle, quad, or small 4 cylinder application
1lb 14oz - 90(h)x110(L)x62(w)
12v Mychron 4 and 5 Extended Pack
12v external pack for Mychron 4 and 5 Gauges
Complete kit with 42" power cable, charger, and stock battery delete cover.
Mounts to driver panel bracket.
*battery life yet to be determined
7oz - 80(h)x42(L)x42(w)
You must keep the battery from falling below 10volts, and must not be charged higher than 14.8v
If your bike has a parasitic draw please monitor the voltage. If sitting for more than 2 weeks just unplug the battery.
Trickle chargers can be used but must automatically stop charging at 14.4-14.8v
These are not a deep cycle battery, and do not have a high capacity, so keep that in mind.
They are high amp, lightweight, small, and more powerful than lead acid.
Special charger is required to keep from being over charged and to balance the cells.
